1/14 EXCAVATOR KITTEN 394
uild yourself a fully electric hobbygrade excavator.
The model is a 1/14th scale 50 ton class excavator.
Printable on a 22x22 buildplate!
Full partslist with links to all the parts you need to get started!
An overview of all the screws needed is also included.
100 page detailed build manual to provide as much information and help as I possibly can!
Customize your build with different options:
-Choose between two width's of the excavator with an additional option for Four different trackpad-widths!
-Choose between 3d printed tracks, or steel chain tracks!
-Two buckets and a ripper is included.
This has been a very big challenge for me to make availiable for everyone, I have tried my best at making all the parts as user friendly as I possibly can.
You can also watch the entire build on youtube, and see how I built mine here:
https://www.youtube.com/playlist?list=PLdh4mhBIIM2L41c1OqEzcC3UIPebcdfgF
This project is a combination of 3d printing, and metal works. So you will need tools for cutting metal, and drill holes.
I will say that this is a very timeconsuming build, so youll need to be prepared to use some time on it.
You will need alot of different screws and hardware.
This Excavator model is compatible with the electric 40-70 ton quick coupler in my profile here:
https://cults3d.com/en/3d-model/gadget/quick-coupler-40-70-ton-class
Runs off a 3S LiPo battery, 2200-5000 mah.
IMPORTANT NOTICE:
I do not show you how to setup your controller or how to put the electronics together in the guide.
