1:7 scale Snowcat with 12-way blade
Early Access Notes
This project is not finished (although now it is getting very close)
All "early release" owners will automatically get access to all future updates at no additional cost. In other words, when the snowcat is fully finished, you will get access to everything. Some things may change, although they will likely be minor, so be prepared for that (That is why you pay a lower price)
The Early-release Instructions are basic and lack polish. You will have everything you need to build it, including files, parts list, and instructions (Take a look below). The early release version is intended for people who more or less know what they are doing in terms of 3D printing and RC electronics. I do not recommend this for beginners.
Machine Performance
In terms of the performance you can expect: This machine has a lot of torque and power. It will pull me around in a sled. It has a fully metal drivetrain that you are unlikely to damage; however, the blade must be used intentionally to avoid damage. This is exactly the case with a real snowcat, too. If you run the blade into a door frame or try to ram one side of the blade into a pile of icy snow at high speed, you might break things. Luckily, you can also print replacement parts. But if you are careful, deliberate, and print your parts nice and thick, you shouldn't have issues. (I haven't broken parts in my testing for months now, and I go pretty hard!)
In good snow conditions (Below freezing, relatively fresh), the tiller lays nice corduroy and the entire machine can groom in a realistic way. The size of this machine makes this possible.
Although the blade and tiller are best used in good snow conditions (cold, relatively fresh) the tracks will handle any snow conditions, as well as summer surfaces like dirt, grass, rock, etc with appropriate caution.
