Перейти к содержимому

Watch a review of the dozer here:
https://youtu.be/WIYtHiZrdJw

I have been working on this model for a very very long time, I present you a
Fully working RC bulldozer, been tested for over a year before release. Low cost parts, simple and easy assembly. This thing pushes everything in its path.
This model comes with many different parts for different setups. You can choose between the standard width dozer, and the wide LGP chassis. There are files for 5 different blades included as well as a variety of different details to choose from.
Parts list included in the zip file, as well as a guide on how to assemble it.
I have also made a complete build series on youtube.
Watch the build-series here:
https://www.youtube.com/playlist?list=PLdh4mhBIIM2KP-2ukHjnittOmo9w28NGp

Or search for Burnie222rc on youtube, and click on "playlists".

Model Files fits a 22x22 printbed.

fully electric dozer, with unbreakable steel drivetrain.
Runs on a 3S lipo battery. 2200mah.

For the chains from the link in the partslist, you'll need approximately 1,5metres (1 set).

I used 1mm steel plates to make the blade knife and skidplate underneath.

List of Screws I have used.
The list is not complete, and shows approximately what you need:

ST = self tapping

2x6 ST 40pcs
3x6 ST 2pcs
3x8 ST 44pcs
m3x16 4pcs
m3x20 8pcs
m3x25 2pcs
m3x50 2pcs (to mount the blade links onto chassis)
m4x10 8pcs (to mount trackmotors)
m4x30 8pcs (to attach drivesprockets to motorcoupler)
m5x30 10pcs (rollers underneath)
m5x35 4pcs (big idle wheels)

You also need M3 locknuts, M4 locknuts
M3 threaded rods
M4 threaded rods
M5 threaded rods